Flap Barrier Gate Organic Glass Retractable RFID Card Reader
Counter Speed Gate
Flap Barrier, half height turnstile, waist height turnstile, falp
turnstile, turnstile, turnstiles, access control turnstile, access
control barrier, sensor gate, sensor barrier, panel barrier, wing
barrier, wing gate, wing turnstile, speed gate, access control
system, perimeter protection barrier.
-> Single-core mechanism: RNCF1088
The flap barrier only equipped with single-core in the cabinet,
usually be used in single lane or multi-lane applications.
->Dual-core mechanism: RNCF1088S
The flap barrier equipped with independent dual-core in the
cabinet, usually be used in multi-lane applications.
The retractable flap turnstile controls pedestrian access between
public and secure areas. The turnstile lane uses an array of
optical sensors to determine the number and direction of persons
passing through the lane. The turnstile uses a retractable flap to
block the pedestrian’s path.
The flap turnstile system is provided with a standard electric
interface and can easily integrates the common 3rd party equipment
with read/write facilities, such as access control system, bar-code
scanner, Token /ID/IC card reader, time & attendance system,
coin collector, card collector, biometric systems (fingerprint
& face recognition), consumption system, ESD system and fare
collection system, etc.
|Flap arm length:||250mm|
|Max arm width:||580MM|
|Housing material:||Stainless steel 304|
|Power supply/frequency:||AC220V±10%, 50Hz|
|Drive motor:||brush motor|
|Input interface:||+5V electric level signal or >100ms impulse signal, drive
current >10mA, dry contact (COM NO).|
|Opening and closing time:||0.5S|
|Power on and reset time:||3s|
|Working environment:||Inner and outer (with shelter) -25ºC~+50ººC|
STANDARD FEATURES & FUNCTIONS:
(1). The turnstile system can easily integrates with the 3rd party equipment, such as Biometric reader, consumption system, ESD
system and access control system etc.
(2). Automatic check fault and alarm prompt function: to convenient
for users to maintain and use.
(3). The running status of device can be set up through pressing
the built-in small keyboard of the main control board.
(4). Infrared detection sensors: The device uses several infrared
sensors transmitter and receiver type. The sensors are positioned
at two different heights to defend against people trying to
roll/crawl through the lane without being detected. The sensors are
positioned at approximately knee height and waist height. The
sensors can detect abnormal access and turnstile system will stay
(5). Anti-pinch function: Auto-alarm will activate for unauthorized
pedestrian movement and tailgating. The barrier uses several photo
sensors to prevent turnstile closure on a person while inside the
(6). Emergency-escape function: When power off, it will be opened
the gates automatically to meet the request of fire protection.
Also the gates will open by pressing the emergency button which can
be remote-controlled whether the power is on or not. (Optional).
(7). Remote control and management function: Through the management
computer to realize remote control and management.
(8). Streamline design that utilizes shared cabinets for multi-lane
(9). The entire system runs smoothly, with a small noise and free
of mechanical impact.
(10). With normally open & normally closed working mode.
(11). Approved CE certificate.
Typical areas of application are: Employee and Visitor Access
Control, Time & Attendance Integration, Loss Prevention,
Government Facilities, Corporate Lobbies, Buildings, Banks, Hotel,
Super market, Park, Building Sites, Museums, Retail outlets,
Railway Terminals and Airports etc.